Surface cleaning · Model undefined
Wheat Roller-Brush Combination Machine
Kernel-by-kernel cleaning that leaves the bran intact.
- 60+ years manufacturing
- 10–500 t/d capacity range
- 100+ patents
- Turnkey commissioning
What it does
This machine treats grain one kernel at a time with a combined peeling and brushing action. It removes the outer epidermis, beard, fine dust and micro-organisms while deliberately preserving the endocarp, seed coat, nucellar layer and aleurone — the layers that hold the bran together.
Technical parameters
Nominal values at standard conditions. Confirm final specification on the order drawing.
| Model | Capacity (t/h) | Weight | Power | Dimensions (mm) |
|---|---|---|---|---|
| TNSW75 | 8–10 | 1,020 kg | 7.5 kW | 2230 × 700 × 1425 |
| TNSW-110 | 10–18 | 1,080 kg | 11 kW | 2230 × 700 × 1425 |
| TNSW-150 | 18–26 | 1,160 kg | 15 kW | 2230 × 700 × 1425 |
Selection guidance
The premium alternative to a second scourer pass when bran integrity matters — whole wheat flour, stone milling, and any line where the bran must stay in large flakes rather than shatter into powder.
Maintenance
Brush segments wear against the screen; inspect every 600 hours and rotate position to even out wear.
Selection cross-check
Surface cleaning: scourer vs brush combination
Both scrub the bran layer to remove dirt and loosen the outer pericarp. They differ in aggression and in what they do to the kernel.
This machine
Wheat Roller-Brush Combination Machine
TNSW
Choose it when
Soft wheat, or where you want scouring and brushing in one machine to save a floor and a transfer point.
Watch out for
Less aggressive than a dedicated scourer. Brushes wear and need periodic replacement — a wear item that is easy to forget in the budget.
Alternative
Horizontal Wheat Scourer
FDMW
Choose it when
Hard wheat with firmly attached dirt, and any wheat where you want aggressive surface action. Standard in most medium and large cleaning houses.
Watch out for
Aggressive enough to break kernels if the clearance is set too tight. Generates heat and dust, so it needs aspiration.
Open Horizontal Wheat Scourer →Decision rule
Hard wheat: scourer. Soft wheat or a tight building: brush-scourer combination.
Answers
Frequently asked questions
Straight answers to the questions engineers and mill owners actually ask us during plant sizing. If your case is not covered, send the wheat specification and your target tonnage.
Ask an engineer →- How much ash reduction is achievable?
- Up to 0.10 percentage points on the whole meal, which is substantial — roughly equivalent to a full extra break passage in ash terms.
Next step
Send your tonnage. Get a flow sheet in 12 working hours.
Send us: daily capacity target, wheat type and quality, available building dimensions, and local power supply. We reply within 12 working hours with a preliminary flow sheet, equipment list and budget range — no obligation.